Peavey SP Series SP2 Powered Enclosure
The Peavey® SP®2P is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. This two-way powered system is comprised of a 1000 W peak switching power amplifier driving a 15" Black Widow® BWX series woofer, now with a long throw voice coil. The 2" RX™22CT titanium diaphragm compression driver is driven by a 500 W peak switching power amplifier, and is coupled to a low coloration waveguide with a coverage pattern of 100° horizontal by 50° vertical.
The SP®2P is capable of up to 130 dB peak SPL. The enclosure is constructed of plywood augmented with internal braces, covered with a textured black painted finish. The shape is a modified-trapezoidal form, with a full-length coated perforated steel grille, to offer an attractive yet durable powered speaker system. A pair of four-way inset handles, one on each side, provide convenient transport and handling. The cabinet and grille are black.
Two independent mixed input channels each offer a balanced input to the preamp/EQ electronics, and a level control. Each channel has one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Channel 2 has a 3.5 mm media jack added. A line out section has male XLR connectors. The Thru outputs allow linking of additional speaker systems, or feed of the signal to a powered subwoofer, etc.
The power amplifiers providing the bi-amplification are low-distortion switching units providing 1000 W peak available power into the nominal 4 ohm load of the woofer, and a 500 W peak available power into the nominal 8 ohm load of the tweeter. The power supply for both amps is a switch mode type for low weight and high efficiency. Both amplifiers feature our DDT™ compression, which virtually eliminates audible power amplifier clipping. Cooling is via forced air circulation. A four-way handle on each side provides ease of transport, while multiple fly points are provided to allow overhead rigging.
The combination of the Black Widow® BWX woofer with the RX™22CT tweeter and DSP crossover and EQ provide a clarity and impact beyond conventional powered enclosures. The switching power amps and switch-mode power supply, along with the professional grade speaker components, provide this high level of technological sophistication at a very light weight, while at a very reasonable cost.
Bi-amplified powered speaker system • Eq presets available via rotary encoder pushbutton select • 9-Band eq and other system settings accessed via rotary encoder pushbutton select • Dynamic bass boost function • Up to 150 ms of architectural delay • Dsp based crossover, limiting and eq • Two independent mixed input channels, with gain control and mic/line gain switch • Each channel features a combo jack with 1/4" trs & female xlr balanced input • Input 2 has a 3.5 Mm (1/8") stereo media input jack • Output connectors are male xlr • Four-way inset handles on each side • Peak spl up to 130 db with music! • Full length perforated steel grille • Peavey rx™22ct compression driver tweeter on a quadratic throat waveguide • Rugged plywood enclosure, with bracing and dado construction • 15" Black widow® bwx woofer • Pole mount included • Both power amps have ddt compression • Reduced weight - only 59 pounds! • 1000 Watts peak available woofer power, 500 watts peak available tweeter power • Multiple fly points • Fan cooled for maximum reliability
Dimensions Packed (HxWxD): 30” (762mm) x 20” (508mm) x 20” (508mm) • Weight: 66lb (30 kg)